as – Übersetzung – Keybot-Wörterbuch

Spacer TTN Translation Network TTN TTN Login Français English Spacer Help
Ausgangssprachen Zielsprachen
Keybot 206 Ergebnisse  www.tour-taxis-residential.com  Seite 5
  Application Notes | Hel...  
The figure 1 presents the measurement of Martens hardness and the associated standard deviation on two plastic lenses, samples courtesy of Rodenstock GmbH, Munich. The samples were produced under the same process conditions but exhibit differences in the composition of the coating system.
Abbildung 1 zeigt die Messung der Martens-Härte und die dazugehörige Standardabweichung an zwei Kunststoffgläsern der Firma Rodenstock GmbH, München. Die Proben wurden unter gleichen Prozessbedingungen hergestellt, sind aber unterschiedlich beschichtet worden. Als Ergebnis zeigt sich eine deutliche Änderung der Martens-Härte.
  Application Notes | Hel...  
The FISCHERSCOPE® HM2000 is optimally suited for the precise determination of the mechanical characteristics of thin anodized coatings. Beside the hardness, other parameters such as the plastic or elastic material characteristics can be accurately assessed.
Das FISCHERSCOPE® HM2000 ist hervorragend zur Bestimmung der mechanischen Eigenschaften dünner Eloxalschichten geeignete. Neben der Härte lassen sich weitere plastische und elastische Materialparameter ermitteln. Für mehr Informationen steht Ihnen Ihr Fischer-Ansprechpartner gerne zur Verfügung.
  Application Notes | Hel...  
Although only the Martens hardness can be measured depth-dependent using standard methods, additional mechanical properties such as the Vickers hardness or the elastic modulus of indentation can be determined via the ESP (Enhanced Stiffness Procedure) method, which employs partial loading and unloading.
Während die Martens-Härte bereits mit dem Standardmessverfahren tiefenabhängig gemessen wird, können mittels einer sogenannten ESP-Messung (Enhanced Stiffness Procedure) weitere mechanische Eigenschaften wie die Vickers-Härte oder das elastische Eindringmodul tiefenabhängig ermittelt werden.
  Application Notes | Hel...  
Quality control therefore requires correspondingly powerful measurement methods and systems. For the standard-compliant determination of such material parameters as hardness and elastic modulus the instrumented indentation test can be used, even thin coatings of less than 100 nanometres in thickness can be measured accurately.
Die Qualitätskontrolle dieser Beschichtungen erfordert entsprechend leistungsfähige Messverfahren und -systeme. Für die normgerechte Bestimmung von Werkstoffparametern wie Härte und Elastizität kann die instrumentierte Eindringprüfung genutzt werden. Selbst dünne Beschichtungen unter 100 nm können präzise gemessen werden.
  About Fischer | Fischer...  
As a DAkkS-accredited institute, FISCHER not only sells but also manufactures and certifies calibration standards.
En tant qu'institut accrédité DAkkS, FISCHER commercialise mais également fabrique et certifie des standards de calibrage.
  Solutions: Galvanizatio...  
Measurement technology for the determination of mechanical properties as well as the coating thickness of anodized aluminum.
Technologie de mesure pour déterminer les propriétés mécaniques et l'épaisseur de revêtement de l'aluminium anodisé.
  Solutions: Galvanizatio...  
Measurement technology for the determination of mechanical properties as well as the coating thickness of anodized aluminum.
Technologie de mesure pour déterminer les propriétés mécaniques et l'épaisseur de revêtement de l'aluminium anodisé.
  Solutions: Foodstuffs, ...  
Test optical components or dentures for mechanical properties, as well as bearings for hairline cracks.
Tester les propriétés mécaniques des composants optiques ou prothèses dentaires, ainsi que la présence de fissures capillaires dans les paliers.
  Solutions: Foodstuffs, ...  
Test optical components or dentures for mechanical properties, as well as bearings for hairline cracks.
Tester les propriétés mécaniques des composants optiques ou prothèses dentaires, ainsi que la présence de fissures capillaires dans les paliers.
  Solutions | Fischer Ins...  
Measurement technology for electronics such as printed circuit boards, surface-mounted components and semiconductors.
Technologie de mesure pour l'électronique telle que les circuits imprimés, les composants montés en surface et les semi-conducteurs.
  Solutions: Material Ana...  
With FISCHER measurement technology you can precisely determine properties such as particle size or elemental composition of metals.
La technologie de mesure FISCHER vous permet de déterminer précisément des propriétés telles que la taille des particules ou la composition élémentaire des métaux.
Arrow 1 2 3 4 5 6 7 8 9 10 Arrow