you are forwarding – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot      18 Results   7 Domains
  kopi.sztaki.hu  
Show textShow cached sourceOpen source URL
If you are forwarding or re-posting a message you've received, do not change the wording. If the message was a personal message to you and you are re-posting to a group, you should ask permission first.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine kopi.sztaki.hu as primary domain
Légy nagyon óvatos, ha egyszerre több talk-od is fut! (Fordító megjegyzése: Komoly esélyed van rá, hogy előbb-utóbb összekevered, hogy melyik talknál kivel és miről beszélgetsz. Kérdéseidet és válaszaidat rossz helyre küldve komikus és/vagy kínos helyzetet teremthetsz.)
  9 Hits www.datapro.lt  
Show textShow cached sourceOpen source URL
It is important to setup a static IP address in the GNSS Reference Station that you are forwarding a port to. This ensures that your ports will remain open even after it reboots. To find a vacant IP address within the subnet, use the ping command from the command prompt.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine topconpositioning.com as primary domain
Here we picked 192.168.0.200 randomly, getting no replies signifying there is no device in this subnet with this address.  You are free to use it to configure the GNSS receiver. In the case of Netgear, the default subnet is 192.168.0.1. This is the subnet visible in the ipconfig reply.
  www.gentoo.org  
Show textShow cached sourceOpen source URL
Unfortunately, iptables does not accept hostnames when port forwarding. If you are forwarding an external port to the same port on the internal machine, you can omit the destination port. See the iptables(8) man page for more information.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine gentoo.org as primary domain
Toate regulile pentru transferul de porturi sunt de forma iptables -t nat -A PREROUTING [-p protocol] --dport [port extern pe router] -i ${WAN} -j DNAT --to [ip/port care trebuie transferat]. Din păcate, iptables nu acceptă nume de maşini gazdă când transferă porturile. Dacă transferaţi un port extern către acelaşi port folosit pe maşina curentă, puteţi omite portul destinaţie. Consultaţi pagina de manual iptables(8) pentru mai multe informaţii.