with different types of – Chinese Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot      35 Results   31 Domains
  www.solidcam.com.cn  
Show textShow cached sourceOpen source URL
This part demonstrates the use of iMachining with different types of geometry options. The advanced option of profile angled wall option is also used to mill the angled wall with a tapered end mill. The part has a 3D model for stock and is mounted in a milling fixture device.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine solidcam.com.cn as primary domain
This part demonstrates the use of iMachining on a part with a cylinder stock. It also shows the use of the chamfer option with different cutting diameter values on the same tool for different operations. The stock is a 3D cylinder model mounted in a 3 jawed chuck. The operations used are Face Mill, iMachining, Drill and Chamfering. The link above includes the part with the fixture. It also includes the posts and machine for Machine Simulation.
  incidentfree.noc.qa  
Show textShow cached sourceOpen source URL
The choice between pull or shear testing depends on the application and the test objectives. XYZTEC has a lot of experience with different types of copper pillar products and can advise you on how to test in order to get the best information for your quality assurance process.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine xyztec.com as primary domain
The video below shows a test. The programmed landing force is 5gf. As the landing contact is initially a point, even with a low landing force, a small amount deformation occurs on the top of the solder. The loads on the pillar bond though are small and compressive and have no detrimental effect on the measurement. The Condor Sigma is the only bond tester in the world with a programmable landing force and is capable of lower landing forces than any other tester.