softwareebene – English Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot      10 Results   9 Domains
  www.rodadivael.it  
TELOC® 3000 ist Teil einer ganz neuen intelligenten Gerätegeneration, die den höchsten Anforderungen genügt. Aufgrund der offenen Architektur des Systems lassen sich neue Funktionen auf der Hardwareebene und auf der Softwareebene integrieren.
TELOC® 3000 is part of a brand new smart-tech equipment generation that satisfies the most demanding requirements. Due to the open architecture of the system, new functions can be integrated at hardware and at software level. The housing can be customised
  2 Hits www.proci.hu  
Wassertropfen auf der Displayoberfläche stören vor allem bei Multitouch-Displays. Mit mehreren Kniffen umgehen die Entwickler das Problem auf Softwareebene. So klassifiziert die Treibersoftware statische oder sich nur minimal bewegende Signale als Nicht-Finger und rechnet das Störsignal des Tropfens heraus.
Drops of water on the surface of the screen have a particularly disturbing effect on multi-touch displays. Developers have found a number of tricks to avoid the problem on the software level: The driver software, for example, classifies static or only minimally moving signals as non-fingers and removes the interfering signal sent by the drop. Only when the screen control recognises that something on the surface is moving intentionally will it translate the signal into input. In developing the firmware, Garz & Fricke cooperate closely with the manufacturers of the touch controller. The fine tuning, specifically with regard to the mechanical construction and the thickness of the cover glass, then takes place back in Hamburg.
  www.cucinandosimpara.it  
Der 4x-Modus ist aus Gründen der Signalintegrität auf 1,5 V beschränkt. Die Signalisierungsrate ergibt sich aus einem auf Softwareebene durchgeführten Abgleich, abhängig von den Kapazitäten von AGP-Master und -Target.
All PNY graphics cards are based on the AGP 2.0 Specification signal in a 1.5 volt or 3.3 volts. The AGP interface allows signaling at either 3.3 volts or 1.5 volts. The signaling level is determined through the value of I/O interface voltage. AGP add-in cards operate at one of the two signaling levels and can only be plugged into a motherboard capable of supporting that particular signaling level. The 1x and 2x modes can operate at either signaling level. The 4x mode is restricted to the 1.5 volt signaling level because of signal integrity limitations. The signaling rate is determined by software negotiation based on the capabilities of the AGP master and target.
  www.teichmann-krane.de  
Der 4x-Modus ist aus Gründen der Signalintegrität auf 1,5 V beschränkt. Die Signalisierungsrate ergibt sich aus einem auf Softwareebene durchgeführten Abgleich, abhängig von den Kapazitäten von AGP-Master und -Target.
All PNY graphics cards are based on the AGP 2.0 Specification signal in a 1.5 volt or 3.3 volts. The AGP interface allows signaling at either 3.3 volts or 1.5 volts. The signaling level is determined through the value of I/O interface voltage. AGP add-in cards operate at one of the two signaling levels and can only be plugged into a motherboard capable of supporting that particular signaling level. The 1x and 2x modes can operate at either signaling level. The 4x mode is restricted to the 1.5 volt signaling level because of signal integrity limitations. The signaling rate is determined by software negotiation based on the capabilities of the AGP master and target.
  www.igs.com.tw  
Der 4x-Modus ist aus Gründen der Signalintegrität auf 1,5 V beschränkt. Die Signalisierungsrate ergibt sich aus einem auf Softwareebene durchgeführten Abgleich, abhängig von den Kapazitäten von AGP-Master und -Target.
All PNY graphics cards are based on the AGP 2.0 Specification signal in a 1.5 volt or 3.3 volts. The AGP interface allows signaling at either 3.3 volts or 1.5 volts. The signaling level is determined through the value of I/O interface voltage. AGP add-in cards operate at one of the two signaling levels and can only be plugged into a motherboard capable of supporting that particular signaling level. The 1x and 2x modes can operate at either signaling level. The 4x mode is restricted to the 1.5 volt signaling level because of signal integrity limitations. The signaling rate is determined by software negotiation based on the capabilities of the AGP master and target.