stenen – Finnish Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 4 Results  hearhear.org  Page 9
  Delicate cleaning of br...  
Show textShow cached sourceOpen source URL
Er waren maar drie dagen nodig om de boerderij volledig te renoveren en te reinigen. Met een traditionele methode, zoals het gebruik van een metalen borstel voor de stenen en baksteen of een zandstraalketel, zou het weken geduurd hebben.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine graco.com as primary domain
It only took 3 days to completely renovate and clean the farm, instead of weeks with a traditional method. A traditional method could be the use of a metallic brush on the stones and bricks, or a dry blast pot. A traditional method not only takes longer, but also produces a lot of dust and grit on the ground resulting in an additional three days’ work for cleaning and removing the grit. Thanks to EcoQuip’s vapor-abrasive technology, there was almost no dust, just a small amount of water and a negligible quantity of media left on the ground which was very easy to remove.
  Graniet afwerken met pu...  
Show textShow cached sourceOpen source URL
Aan de hand van een nieuwe gepatenteerde techniek genaamd D-Kerb, die ontwikkeld is door D-Drill, kunnen de stenen ter plekke worden gesneden, waardoor de dure stoepranden niet meer vervangen hoeven te worden, de weg niet moet worden afgesloten en er geen afval moet worden afgevoerd.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine graco.com as primary domain
A new patented technique called D-Kerb, developed by D-Drill, cuts the stones in situ, removing the need for expensive kerb replacement, road closures and waste disposal. The downside of cutting any stone is the appearance of the cut surface. With granite, the surface tends to be smooth and stands out compared to the existing surfaces which are aged and worn. For the cycle path to reach its full potential, EcoQuip EQ300s was used to create a pitted finish on the granite which was the same as that of the existing kerb stones. Unlike other technologies, such as UHP or dry blast, the lack of waste generated by the EQ300 means that the street remains open with only shrouding around the work area. The time taken to resurface 40 linear meters was a couple of hours. The traditional way to re-profile stone is the use of needle guns. This would have taken days to cover the distance required. EcoQuip EQ300 is a self-contained unit attached to an appropriately sized air compressor which allows it to be moved to a jobsite.
  Graniet afwerken met pu...  
Show textShow cached sourceOpen source URL
Aan de hand van een nieuwe gepatenteerde techniek genaamd D-Kerb, die ontwikkeld is door D-Drill, kunnen de stenen ter plekke worden gesneden, waardoor de dure stoepranden niet meer vervangen hoeven te worden, de weg niet moet worden afgesloten en er geen afval moet worden afgevoerd.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine graco.com as primary domain
A new patented technique called D-Kerb, developed by D-Drill, cuts the stones in situ, removing the need for expensive kerb replacement, road closures and waste disposal. The downside of cutting any stone is the appearance of the cut surface. With granite, the surface tends to be smooth and stands out compared to the existing surfaces which are aged and worn. For the cycle path to reach its full potential, EcoQuip EQ300s was used to create a pitted finish on the granite which was the same as that of the existing kerb stones. Unlike other technologies, such as UHP or dry blast, the lack of waste generated by the EQ300 means that the street remains open with only shrouding around the work area. The time taken to resurface 40 linear meters was a couple of hours. The traditional way to re-profile stone is the use of needle guns. This would have taken days to cover the distance required. EcoQuip EQ300 is a self-contained unit attached to an appropriately sized air compressor which allows it to be moved to a jobsite.
  Graniet afwerken met pu...  
Show textShow cached sourceOpen source URL
Aan de hand van een nieuwe gepatenteerde techniek genaamd D-Kerb, die ontwikkeld is door D-Drill, kunnen de stenen ter plekke worden gesneden, waardoor de dure stoepranden niet meer vervangen hoeven te worden, de weg niet moet worden afgesloten en er geen afval moet worden afgevoerd.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine graco.com as primary domain
A new patented technique called D-Kerb, developed by D-Drill, cuts the stones in situ, removing the need for expensive kerb replacement, road closures and waste disposal. The downside of cutting any stone is the appearance of the cut surface. With granite, the surface tends to be smooth and stands out compared to the existing surfaces which are aged and worn. For the cycle path to reach its full potential, EcoQuip EQ300s was used to create a pitted finish on the granite which was the same as that of the existing kerb stones. Unlike other technologies, such as UHP or dry blast, the lack of waste generated by the EQ300 means that the street remains open with only shrouding around the work area. The time taken to resurface 40 linear meters was a couple of hours. The traditional way to re-profile stone is the use of needle guns. This would have taken days to cover the distance required. EcoQuip EQ300 is a self-contained unit attached to an appropriately sized air compressor which allows it to be moved to a jobsite.